Handcrafted 16G 50/50-3219
A sink we fabricate and install — get your free quote.
Details
- Material
- Metal
- Color
- Stainless
- Finish
- handcrafted undermount
Templated, fabricated, and installed by our own crew across the northwest suburbs.
How we do sink & faucet installation →
Free in-home quoteWhat is Handcrafted 16G 50/50-3219?
Handcrafted 16G 50/50-3219 is a 16-gauge stainless steel double-bowl kitchen sink, about 32 by 19 inches and 10 inches deep. The two bowls are equal, which suits washing on one side and draining on the other. A sink wants to be about three inches narrower than its base cabinet, so this one needs a 36-inch sink base.
About Handcrafted 16G 50/50-3219
A brass or zinc body under a plated finish — the finish is what you live with day to day, not the metal underneath it. Color family: Stainless. Finish is handcrafted undermount.
We cut and polish the opening in the stone for it, set it, and reconnect the plumbing while we are already under your counter. It is one of 8 colors we stock from the Double Bowl Kitchen Sinks range.
But seriously though — get the free quote and we will bring the tape measure.
Specs
What is on the spec sheet — nothing inferred.
- Material
- Metal
- Collection
- Double Bowl Kitchen Sinks
- Color family
- Stainless
- Finish
- Handcrafted undermount
How it meets the countertop
The mount type decides what we cut, and what you see every day.
This is an undermount sink, and that is a decision about the stone rather than about the sink. The opening is cut to the bowl and its edge is polished, because with the sink hung underneath, that cut edge is what you see and what your hand runs over every day. There is no rim sitting on the surface, so crumbs go straight into the bowl instead of catching on a lip.
Mount
- Handcrafted undermount — handcrafted
Size, depth, and the cabinet under it
The numbers off its own spec line, and what each one constrains.
Size
Figure on a base cabinet of at least 36" — the rule of thumb is bowl width plus about three inches for the cabinet sides. We measure your actual run at template rather than trusting the rule.
- 32"x19"
Two bowls
This is a double bowl, which means the width quoted is the overall footprint and each side is smaller than it sounds. Worth picturing your largest pan before choosing it over a single.
What it costs installed
Published benchmark ranges, so you can sanity-check any quote — including ours.
| Line item | Typical range | Unit | As of |
|---|---|---|---|
| Farmhouse sink cutout premium on a countertop fabrication quote | $150–$400 | per project | 2026-07 |
| Farmhouse/apron sink conversion (installed) | $700–$2,200 | per project | 2026-02 |
| Kitchen sink replacement, drop-in (installed) | $300–$900 | per project | 2026-02 |
| Kitchen sink replacement, undermount (installed) | $500–$1,400 | per project | 2026-02 |
| Sink cutout | $150–$400 | per cutout | 2026-07 |
| Sink or faucet cutout in stone countertop | $100–$500 | per cutout | 2025-01 |
Regional benchmarks for the Chicago market — not an Ace quote. Your number depends on square footage, edge, cutouts and tear-out.
Sources: SlabWise; NearbyHunt, 2026; SlabWise, 2026; Granite Selection (Chicago-area fabricator), 2025
Similar surfaces
Same family — worth seeing side by side before you commit.
Metal18G 40/60 - 3120
Stainless · Undermount
Read more →
Metal18G 40/60 - 3120S
Stainless · Undermount
Read more →
Metal18G 50/50 - 3118
Stainless · Undermount
Read more →
Metal18G 60/40 - 3120
Stainless · Undermount
Read more →
Metal18G 60/40 - 3120S
Stainless · Undermount
Read more →
MetalDouble Bowl 18G 50/50 - 3322
Stainless · Overmount
Read more →
Questions about Handcrafted 16G 50/50-3219
Answered from this fixture’s own catalog attributes — nothing generic.
How does Handcrafted 16G 50/50-3219 mount?
Undermount, hand-finished — the deck stays flat and unbroken, and the bowl is clipped up underneath it. Worth knowing before you shop: the mount is a decision about the countertop as much as the sink, and a laminate top cannot take one. This one measures 32"x19" across, so it wants a 36" base cabinet.
How many bowls does Handcrafted 16G 50/50-3219 have?
Two, cut evenly down the middle. One side washes, the other drains — the arrangement most people picture when they say "double sink". What it costs you is the ability to lay a full-size sheet pan flat in either half. The pair measures 32"x19" across, so it wants a 36" base cabinet.
What is Handcrafted 16G 50/50-3219 made of?
Steel, 16 gauge, with sound-deadening pads underneath the bowl. Thickness is what you are really buying in a stainless sink: a thin one flexes under a full pot and rings under the tap, and no amount of finish hides either. On a bowl this wide the gauge is doing real work — there is a lot of unsupported span under your hands, and it is the difference between a sink that feels solid and one that gives.
Want this in your kitchen?
We supply and install Handcrafted 16G 50/50-3219 out of our Elk Grove Village shop — templated digitally, cut to your cabinets, installed by our own crew.
Ready for a real number?
Free in-home template and an honest quote — you keep your money until there's a countertop to trade it for.