Double Bowl 18G 50/50 - 3322
A sink we fabricate and install — get your free quote.
Details
- Material
- Metal
- Color
- Stainless
- Finish
- Overmount
Templated, fabricated, and installed by our own crew across the northwest suburbs.
How we do sink & faucet installation →
Free in-home quoteWhat is Double Bowl 18G 50/50 - 3322?
Double Bowl 18G 50/50 - 3322 is an 18-gauge stainless steel double-bowl kitchen sink, about 33 by 22 inches and 8 inches deep. The two bowls are equal, which suits washing on one side and draining on the other. It drops in from above and the rim rests on the counter, hiding small imperfections in the cutout.
About Double Bowl 18G 50/50 - 3322
A brass or zinc body under a plated finish — the finish is what you live with day to day, not the metal underneath it. Color family: Stainless. It comes overmount.
Undermount openings are cut and polished in our shop off the template, not freehanded in your kitchen. It is one of 8 colors we stock from the Double Bowl Kitchen Sinks range.
But seriously though — get the free quote and we will bring the tape measure.
Specs
What is on the spec sheet — nothing inferred.
- Material
- Metal
- Collection
- Double Bowl Kitchen Sinks
- Color family
- Stainless
- Finish
- Overmount
How it meets the countertop
The mount type decides what we cut, and what you see every day.
An overmount, or drop-in. The sink sits on top of the counter with its rim overlapping the opening, so the cutout underneath does not need a polished edge. Simpler and cheaper to fit; the rim is the compromise, since anything on the counter has to go over it to reach the bowl.
Mount
- Overmount
Size, depth, and the cabinet under it
The numbers off its own spec line, and what each one constrains.
Size
Figure on a base cabinet of at least 36" — the rule of thumb is bowl width plus about three inches for the cabinet sides. We measure your actual run at template rather than trusting the rule.
- 33"x22"
Depth
A shallower bowl, which means less bending to reach the bottom and less room to hide a stack of plates. On a vanity that is the right trade; in a working kitchen it is a real one.
- 8"/8"
Two bowls
Two bowls under one rim. The measurement is the pair, not each side — a useful thing to know if the reason you are buying a big sink is a roasting tray.
What it costs installed
Published benchmark ranges, so you can sanity-check any quote — including ours.
| Line item | Typical range | Unit | As of |
|---|---|---|---|
| Farmhouse sink cutout premium on a countertop fabrication quote | $150–$400 | per project | 2026-07 |
| Farmhouse/apron sink conversion (installed) | $700–$2,200 | per project | 2026-02 |
| Kitchen sink replacement, drop-in (installed) | $300–$900 | per project | 2026-02 |
| Kitchen sink replacement, undermount (installed) | $500–$1,400 | per project | 2026-02 |
| Sink cutout | $150–$400 | per cutout | 2026-07 |
| Sink or faucet cutout in stone countertop | $100–$500 | per cutout | 2025-01 |
Regional benchmarks for the Chicago market — not an Ace quote. Your number depends on square footage, edge, cutouts and tear-out.
Sources: SlabWise; NearbyHunt, 2026; SlabWise, 2026; Granite Selection (Chicago-area fabricator), 2025
Similar surfaces
Same family — worth seeing side by side before you commit.
Metal18G 40/60 - 3120
Stainless · Undermount
Read more →
Metal18G 40/60 - 3120S
Stainless · Undermount
Read more →
Metal18G 50/50 - 3118
Stainless · Undermount
Read more →
Metal18G 60/40 - 3120
Stainless · Undermount
Read more →
Metal18G 60/40 - 3120S
Stainless · Undermount
Read more →
MetalHandcrafted 16G 50/50-3219
Stainless · Handcrafted undermount
Read more →
Questions about Double Bowl 18G 50/50 - 3322
Answered from this fixture’s own catalog attributes — nothing generic.
How does Double Bowl 18G 50/50 - 3322 mount?
The rim sits on top of the counter and takes the load, so the material underneath barely matters. That makes it the practical pick on an existing top, at the cost of a raised edge you have to clean around every day. This one measures 33"x22" across and 8"/8" deep, so it wants a 36" base cabinet.
How many bowls does Double Bowl 18G 50/50 - 3322 have?
Two, cut evenly down the middle. One side washes, the other drains — the arrangement most people picture when they say "double sink". What it costs you is the ability to lay a full-size sheet pan flat in either half. The pair measures 33"x22" across and 8"/8" deep, so it wants a 36" base cabinet.
What is Double Bowl 18G 50/50 - 3322 made of?
Sheet stainless, formed at 18 gauge. It is the only sink material in this catalog you can put a hot pan straight into without thinking about it, and the only one that will not chip. What you trade for that is a surface which records small scratches — and then stops, once they even out into a finish of their own. On a bowl this wide the gauge is doing real work — there is a lot of unsupported span under your hands, and it is the difference between a sink that feels solid and one that gives.
Want this in your kitchen?
We supply and install Double Bowl 18G 50/50 - 3322 out of our Elk Grove Village shop — templated digitally, cut to your cabinets, installed by our own crew.
Ready for a real number?
Free in-home template and an honest quote — you keep your money until there's a countertop to trade it for.