Project

Oak kitchen, new undermount sink

An integrated almond sink and a laminate top gave way to white quartz with a stainless undermount, keeping the oak cabinets and the mosaic backsplash.

Wide finished view of the oak kitchen with quartz on both runs and tile flooring
Material
White quartz
Service
Sink & Faucet Installation
Completed
May 2026

The old top here was one piece of almond-colored laminate with the sink molded straight into it — the kind you cannot replace without replacing the whole counter. That is exactly the job quartz is for.

The oak cabinets and the mosaic backsplash stayed. We templated around them, set a white quartz with light movement, and dropped in a proper stainless undermount so the counter wipes straight into the bowl. The kitchen's collection of figurines up on the plate rail survived the day unharmed.

The specification

What went in, in the owner’s own words on the job sheet.

DetailWhat we used
CompletedMay 2026
MaterialWhite quartz
ServiceSink & Faucet Installation

Town and month only — we do not publish a customer’s address.

About White quartz

This kitchen is topped in White quartz. We fabricate it in our own shop, which means the seams, the sink cutout and the edge are cut by the people who set the tops — not shipped in from a third-party shop that never sees the room.

  • <a href="/countertops/">See the full countertop range →</a>
  • <a href="/services/sink-faucet-installation/">Sink &amp; Faucet Installation — how the job runs →</a>
  • <a href="/guides/">Homeowner guides on choosing and caring for stone →</a>

What a job this size runs

Our published installed-project ranges — the same in every town we serve.

Kitchen sizeEngineered QuartzGraniteQuartziteMarble
Galley kitchens (30–45 sqft)$3,600–$6,750$4,200–$7,650$4,500–$8,550$5,100–$9,000
Small kitchens (45–60 sqft)$5,400–$9,000$6,300–$10,200$6,750–$11,400$7,650–$12,000
Medium kitchens (60–75 sqft)$7,200–$11,250$8,400–$12,750$9,000–$14,250$10,200–$15,000
Large kitchens (75–90 sqft)$9,000–$13,500$10,500–$15,300$11,250–$17,100$12,750–$18,000
Extra large kitchens (90–120 sqft)$10,800–$18,000$12,600–$20,400$13,500–$22,800$15,300–$24,000

Installed project ranges as of 2026-07 — template, fabrication and standard installation included. Your kitchen gets a firm number after a free in-home template.

Questions we got asked on this kind of job

Can I retrofit my existing cabinets for aging in place instead of replacing them?

Often, yes. Roll-out trays and slide-out shelves install into most existing base cabinets, knobs swap to 3-inch-plus pulls in an afternoon, a lever faucet replaces a twist handle, and plug-in under-cabinet lights need no electrician. Full replacement earns its cost when the boxes themselves are failing, when the layout blocks the clearances you need (a too-narrow aisle cannot be retrofitted), or when you want structural features like a lowered seated section with knee space and drawer banks throughout.

Can I use my kitchen while the cabinets are being painted?

Partially. Active work typically runs 3-7 business days, during which the cabinet zone is tented in plastic with masking over counters and appliances; the refrigerator is usually reachable but the range often is not, and doors and drawer fronts are away on spray racks or at the shop. Plan simple meals, clear your countertops before day one, and expect modest odor with modern waterborne systems.

Can cabinets be painted during a Midwest winter or a humid August?

Yes - interior work happens year-round in Illinois, Wisconsin, and Indiana - but the calendar changes the timeline. Waterborne enamels want roughly 77 degrees and 50 percent humidity; in a chilly kitchen or a muggy July week, recoat times stretch from 16 hours to 24-36 hours, which can add days to the schedule. Good crews run dehumidifiers and fans and keep the house at normal room temperature, and shops that spray doors off-site sidestep the problem for the doors entirely. The real red flag is a painter promising the same three-day schedule in every season - drying chemistry does not negotiate.

Can my existing thermofoil doors be painted instead of replaced?

Usually not with results worth paying for. Thermofoil is a vinyl film bonded over MDF, and paint adheres poorly to that plastic skin; add the common problem of foil already lifting near ovens and toasters, and a painted thermofoil door tends to chip and peel early. Most pros will steer you to replacement fronts instead; at roughly $30-$80 per door for new MDF or thermofoil doors (as of mid-2026), replacing often costs about the same as quality repainting and lasts far longer. The cabinet boxes can typically stay and be painted or left as-is.

Want one like this?

Free in-home template, an honest number, and one crew from measure to install.

Get your free quote Browse colors

Ready for a real number?

Free in-home template and an honest quote — you keep your money until there's a countertop to trade it for.