Countertop Fabrication in Elk Grove Village, IL

In Elk Grove Village, 0 miles from Elk Grove Village, at 2260 Elmhurst Rd. The saw, the CNC and the polishing are all in that one building — we do not send your slab to a third-party shop and we do not cut stone in your driveway. If a piece needs recutting, it comes back to the same machine that made it.

Here. The saw, the CNC and the polishing are in the Elk Grove Village building, which is also the reason we can pull a piece back in and recut it without a two-week freight cycle.

Ask the fabricator to acid-test a sample: put a drop of lemon juice or vinegar on it for 10-15 minutes — true quartzite will not etch, while dolomitic marble sold under names like "super white" often will. Also try scratching a hidden spot with a steel knife tip; real quartzite (~7 Mohs) resists it. This matters because mislabeled "soft quartzite" behaves like marble but is priced like quartzite.

A basic eased, pencil, or slight-bevel edge is normally included in the fabrication price. Per 2026 national trade pricing, simple upgrades like a wider bevel or half bullnose add about $5-12 per linear foot, mid-range profiles like full bullnose or ogee add $12-20, and premium work like DuPont, laminated, or mitered edges adds $20-35 or more. A typical kitchen exposes 20-35 linear feet of edge, so going premium everywhere usually adds a few hundred dollars - real money, but small next to the slab itself, and you can cut it further by upgrading only the island.

More than most people budget for. As of mid-2026 fabricator pricing, a mitered edge (the technique behind waterfall sides and chunky-looking tops) adds roughly $30-$80 per linear foot over a standard eased edge, waterfall corners run about $150-$300 or more each, and a full waterfall island typically adds $1,000-$3,000 once you count the extra vertical stone and the precision 45-degree cutting and polishing. Porcelain miters cost another 20-30 percent on top because of specialized tooling. It is a legitimate look — the vertical panel also protects island cabinetry from scuffs — but it competes directly with simply upgrading the material itself.

A seam you can find with a fingernail is normal; a seam you can spot from across the room is a workmanship conversation. Reasonable expectations: roughly 1/16 inch wide, flush to about credit-card thickness, color-matched epoxy, placed over supports. Inspect seams, overhangs, and cutouts while the installers are still in your kitchen — adjustments are easy before the adhesive sets and awkward afterward — and photograph anything that concerns you the same day so it lands on the punch list in writing.