Question 1

What backsplash tile can Ace install?

Accepted Answer

Ace installs 397 backsplash tiles: 83 glass, 65 ceramic, and the rest porcelain, stone and mosaic sheet. Subway, hexagon, picket, herringbone and arabesque shapes are all here. Tile goes on after the countertop, because the layout is set off the finished stone.

Question 2

Can I install a tile backsplash myself?

Accepted Answer

Of the three projects, this is the most DIY-friendly: small area, no structural stakes, forgiving timeline. The skills that separate good from regrettable are layout planning around outlets and edges, straight cuts (rent a wet saw), consistent spacing, and clean grout work - and buy 10 to 15 percent extra tile for cuts and breakage. Professional labor runs roughly $5 to $20 per square foot if you decide midway that a flawless finish matters more than the savings.

Question 3

Can I install my own backsplash, or should I hire a tile setter?

Accepted Answer

A straight running-bond or stacked ceramic backsplash is one of the most DIY-friendly tile jobs in a house - small format, no water exposure like a shower, and you save roughly $10-15 per square foot in labor. Hand it to a pro when the job involves glass tile (visible adhesive and cut edges), natural stone (sealing, blade chatter, breakage), herringbone or diagonal layouts (compounding alignment errors), large-format panels, or any slab product, which is fabricator work full stop. Whoever installs it, outlets are the tell: sloppy cuts around receptacles are the first thing a trained eye notices.

Question 4

Ceramic or porcelain - does the difference actually matter on a backsplash?

Accepted Answer

Less than the sales pitch suggests. Porcelain’s advantages - density, near-zero water absorption, chip resistance - matter most on floors; a backsplash never gets walked on, so glazed ceramic holds up fine for decades there. Choose on looks and price, with two caveats: porcelain is the better canvas for convincing marble and brick looks, and ceramic is markedly easier to cut if you are DIYing.

Question 5

Do I have to tear out the old backsplash, or can new tile go over it?

Accepted Answer

Tiling over existing tile is technically possible on a sound, flat installation, but most professionals recommend removal: doubling up adds thickness that crowds electrical outlets, window trim, and the counter joint. Removal typically costs $3 to $6 per square foot and often takes chunks of drywall with it, so expect a wall-repair line on the quote - that is normal, not padding.

Question 6

Do I need special heat-resistant tile behind the range?

Accepted Answer

Ordinary ceramic and porcelain tile are fired in a kiln at well over 1,000 degrees - your range cannot hurt them, so no special product is needed for heat. What actually suffers behind a cooktop is everything around the tile: cement grout absorbs grease and discolors, natural stone like marble can etch and darken from splatter and aggressive cleaners, and quartz slab has resin binders that manufacturers protect with required clearances from burners. Choose the tile for looks and cleanability - glossy glazes wipe down easiest - and put the worry into grout choice and sealing instead. A stainless or glass-and-metal mosaic accent behind the range is a style decision, not a safety requirement.

Question 7

Do I really have to seal a marble or travertine backsplash?

Accepted Answer

Yes - plan on one to three applications a year, with the zone behind the range needing it most; travertine, being more porous, wants it more often than marble. Know what sealer does and does not do: it slows staining from grease and splatter, but it cannot stop etching - the dull marks acids like lemon juice, vinegar, and wine leave on contact. Clean only with pH-neutral stone cleaners (no vinegar, ammonia, or bleach) and a stone backsplash stays beautiful with far less drama than a stone countertop.

Backsplash tile

Crystallized Glass Blend 8mm Savoy Interlocking

Crystallized Glass Blend 8mm Savoy Picket

Metro Gris Blend Interlocking

Casa Blend 3d Honed

Casa Blend 3d Multi Finish

Firenze Blend 3x3 Polished

Ocotillo Blend Interlocking 4mm

Snowcap Blend Interlocking 4mm

Ready for a real number?